Welcome to Greenlan Water Treament|GREENLAN
 +86-156-8868-0910       info@greenlan.com.cn
Home » Applications » Other Industrial Wastewater » Grinding And Polishing Wastewater Treatment

Related Links

Grinding And Polishing Wastewater Treatment

Grinding And Polishing Wastewater Treatment


Solution:

Grinding and polishing waste liquid without pretreatment directly into the IVECDEST low-temperature vacuum evaporator, evaporate under vacuum low-temperature conditions, water vapor in the process of vacuum condensation to form distilled water, collected to the water storage tank, leaving only about 8% of the trace concentrated liquid. It can greatly reduce and remove the organic matter COD and heavy metals in the waste liquid. Through the IVECDEST evaporator, the amount of wastewater can be reduced by more than 92%, and the distilling liquid can be reused as middle water or further treated to meet the discharge standards.


Application:

Light corrosion grinding

Surface Polishing

Grinding wastewater

Glasswork


Brief Introduction:

蓝色横框


The flushing wastewater produced by the roller polishing process usually contains heavy metals, oils and may be contaminated with different chemicals depending on the process. They can't be discharged directly, and most of the time they have to be treated as expensive waste. But you can choose alternative: purification of this kind of wastewater a method of saving resource and economic, it is through the IVECDEST low-temperature vacuum distillation device of vacuum evaporation. The equipment can purify the waste water of roller polishing to the standard of reuse.


Greenlan innovation, the introduction of advanced technology. It can separate contaminants, including emulsified oils, to prepare crystalline distilled water. A great way to recycle water.Using the technology process IVECDEST low temperature vacuum evaporation device to purify such industrial wastewater, the sewage cost can be significantly reduced. The amount of distilled water extracted is more than 98%, so your sewage cost can also be reduced by more than 98%; COD can be reduced by 99%, which can reach the reuse standard or direct discharge.


Process Diagram:

蓝色横框


Grinding and polishing waste liquid without pretreatment directly into the IVECDEST low-temperature vacuum evaporator, evaporate under vacuum low-temperature conditions, water vapor in the process of vacuum condensation to form distilled water, collected to the water storage tank, leaving only about 8% of the trace concentrated liquid. It can greatly reduce and remove the organic matter COD and heavy metals in the waste liquid. Through the IVECDEST evaporator, the amount of wastewater can be reduced by more than 92%, and the distilling liquid can be reused as middle water or further treated to meet the discharge standards.


Greenlan low-temperature evaporation and crystallization technology research and development center.

Product Category

Quick Navigation

Contact Us

Tel: +86-156-8868-0910
WhatsApp: +8615688680910
Skype: +86-156-8868-0910
E-mail: info@greenlan.com.cn
Get in touch
Address: No.35-1, Zhejiang Road, Lingang Economic and Technological Development Zone, Weihai City, Shandong Province, China
Copyright © 2024 Greenlan All Rights Reserved